HHOINFO

The International Open Source HHO / HOD Builders Network.

I mix 5% alcohol in with the distilled water to get a good evaporation. when the water vapor enters the combustion chamber it expands and causes more pressure resulting in more HP, cleaner burn, cooler engine, and better MPG's. In WW2 pilots found that if they fly closer to the surface of the ocean that had more distance on a tank of fuel, it was the water varop, they later made a water injected engine shortly after that. that is the reason I am trying it. so far its working great. I hope more people try this and have great results.

Rating: 0/5 stars
Tags: incertion, vapor, water, wvi
Views: 169

Share 

Comment

You need to be a member of HHOINFO to add comments!

Join this Ning Network

Helz McFugly Comment by Helz McFugly on November 1, 2009 at 11:24am
right. just get the small end a few inches from the Throttle body.
skysabre Comment by skysabre on November 1, 2009 at 6:12am
Robert Foreman used soda bottles, but those plastic funnels look more firm and stable. This is a great idea! You don't need to place 2 end-to-end, right?
Christer Dirfeldt Comment by Christer Dirfeldt on November 1, 2009 at 4:15am
In that case, NICE :-)
Helz McFugly Comment by Helz McFugly on October 31, 2009 at 7:58pm

man you can gt these small cone shaped funnels anywhere and they are 4" on the large side and 3/8" on the small side, that way they will fit any intake hose. you can cut the large end to fit tight insode the hose and the small end to a little larger then half your intake hose size to create the vacuum. I guess you could use a soda bottle but the funnels are so smooth and straight,here is one as they come before you cut it. ill post a pic later of what mine looks like after being trimmed.
Christer Dirfeldt Comment by Christer Dirfeldt on October 31, 2009 at 6:36pm
Helz, do you think the straight part in the end of the venturi is needed?

If not, I will be possible to take a water/soda bottle, the bigger ones, and cut to the right size :-) That should make it much easier to make the system on all different sizes of intake hoses!
Christer Dirfeldt Comment by Christer Dirfeldt on October 31, 2009 at 4:03pm
So it is a non turbo then?

That vacuum system is very efficient. I need to test if my ball venturi can do the same first. Otherwise I will try to make a similar system :-)
Helz McFugly Comment by Helz McFugly on October 31, 2009 at 11:06am
I have a 3.5L V6. I love this car
Peter Irwin Comment by Peter Irwin on October 31, 2009 at 7:50am
I'ved used Methylated Spirits, 95% ethanol, 5% methanol. I buy it in the supermarket here in Australia. It's an old cure for water blocking carby jets, it mixes with the water and lowers its surface tension enough to go through the jets and get burnt.
Christer Dirfeldt Comment by Christer Dirfeldt on October 31, 2009 at 5:48am
I will try to get some methanol anyway :-)

NOT drinking it ;-)

What type of engine do you have in your car by the way?
Helz McFugly Comment by Helz McFugly on October 30, 2009 at 9:51am
yikes. cant help you with that. they sell it everywhere here. you can buy a 55 gallon drum on ebay for $189.00 . I guess if we want to kill people over here we just shoot them.

Badge

Loading…

Groups

Music

Loading…

© 2009   Created by gabet123 on Ning.   Create a Ning Network!

Badges  |  Report an Issue  |  Privacy  |  Terms of Service

Sign in to chat!